109+ Free Woodworking Plans For Beginners Free Download

assistance.free.fr

```html

Opening: Unleash Your Inner Carpenter Building a Simple Birdhouse Thinking about adding a touch of nature to your backyard or garden? Building a birdhouse is a rewarding and relatively easy DIY project that even beginners can tackle. This guide will walk you through the process step-by-step, transforming raw wood into a cozy haven for feathered friends. Prepare to be amazed at what you can create with just a few basic tools and materials!

Step 1: Gathering Your Materials and Tools Before you begin, ensure you have everything you need. This will streamline the building process and prevent frustrating interruptions. Here's what you'll require:

Wood: Untreated cedar, pine, or redwood are excellent choices. Aim for a board that's about 1" thick. A good starting dimension is 1" x 6" x 6' which should be enough for a basic birdhouse.

Measuring Tape: Essential for accurate cuts.

Pencil: For marking your cut lines.

Saw: A hand saw, jigsaw, or circular saw will work. Choose one you're comfortable using.

Drill: Needed for creating the entrance hole and attaching the pieces.

Drill Bits: Select a drill bit size appropriate for the screws you'll be using and another for the entrance hole (diameter depends on the bird species you want to attract – research this!).

Screws: Exterior-grade screws (1 1/4" or 1 1/2") are recommended for durability.

Sandpaper: To smooth rough edges and prevent splinters.

Safety Glasses: Always protect your eyes when cutting and drilling.

Step 2: Cutting the Wood Pieces Using the following dimensions (these are just a suggestion, feel free to modify for size!), measure and cut the wood pieces according to the birdhouse design:

Front: 6" wide x 8" tall

Back: 6" wide x 10" tall (the extra height allows for roof overhang)

Sides (2 pieces): 6" wide x 7" tall

Bottom: 6" wide x 6" deep

Roof (2 pieces): 6" wide x 8" deep

Remember to double-check your measurements before cutting, and always prioritize safety when using power tools.

Step 3: Assembling the Birdhouse Body Now it's time to start putting the pieces together:

Attach the Sides to the Bottom: Apply a small amount of wood glue (optional, but adds strength) to the edges of the bottom piece. Position the side pieces flush with the edges and screw them into place. Ensure they are square and aligned.

Attach the Front: Apply glue (optional) to the edges of the side and bottom pieces where the front will be positioned. Place the front piece flush with the edges and screw it into place.

Attach the Back: Similarly, apply glue (optional) and attach the back piece, ensuring it's flush with the bottom and sides. The top of the back piece will extend above the sides to create a slope for the roof.

You should now have a basic box structure.

Step 4: Creating the Entrance Hole and Adding a Perch (Optional)

Drill the Entrance Hole: Determine the appropriate hole size for the bird species you're targeting (e.g., 1 1/2" for bluebirds). Drill the hole in the center of the front piece, approximately 2" to 3" below the top edge.

Add a Perch (Optional): While perches were once common, many ornithologists now recommend against them, as they can provide predators with a foothold. If you choose to add one, drill a small hole below the entrance hole and insert a short dowel rod or small piece of branch.

Step 5: Attaching the Roof

Position the Roof Pieces: Align the roof pieces so they overhang the front and sides of the birdhouse. Ensure the roof pieces meet snugly at the top.

Attach the Roof: Apply glue (optional) to the top edges of the front, back, and side pieces. Secure the roof pieces with screws, driving them in at an angle for a stronger hold.

Step 6: Sanding and Finishing (Optional)

Sanding: Use sandpaper to smooth any rough edges or splinters on the birdhouse. Pay particular attention to the entrance hole to prevent injury to birds.

Finishing (Optional): While painting the inside of the birdhouse is discouraged (it can be harmful to birds), you can paint or stain the outside for aesthetic purposes. Use non-toxic, water-based paints or stains. Allow the finish to dry completely before placing the birdhouse outside. Avoid bright colors that can attract predators.

Step 7: Mounting Your Birdhouse

Choose a Location: Select a location that is sheltered from strong winds and direct sunlight. Mount the birdhouse on a pole, tree, or building, ideally facing away from prevailing winds.

Mounting: Use appropriate hardware (screws, brackets, etc.) to securely attach the birdhouse to its mounting location.

Now sit back and wait for your new tenants to arrive!

Conclusion: A Home for the Birds, Pride for You Congratulations! You've successfully built a birdhouse. This simple project not only provides a safe haven for birds but also allows you to connect with nature and develop your woodworking skills. With a little care and maintenance, your birdhouse will offer years of enjoyment and contribute to the well-being of your local avian population. Now, get ready to witness the joy of watching birds move into their new home!

```

Assistance Free

assistance.free.fr

3 Free Software Tools You Need For 2017

activerain.com

The Best Free Software For A New Pc

www.pcworld.com